3 Mistakes You Make While Cleaning Concrete Stains or Stains on a Concrete Floor

  • Reading time:5 mins read
  • Post comments:0 Comments

3 Mistakes You Make While Cleaning Concrete Stains or Stains on a Concrete Floor

A blog about how to clean cement stains along with mistakes made.

If you have concrete floors in your home, you may be wondering how to achieve the best results when cleaning stains out of your floor. Here are three mistakes that you should avoid when cleaning concrete floors in your home:

1. Using the Wrong Product

There are many different products that can be used to clean and polish concrete floors, but not all of them are going to give you the results you want. If you’ve had difficulty in the past with cleaning stains out of your concrete floors, it could be because you’re using a product that’s not right for the job. Before using any product on your floor, read up on what it’s designed to do so that you know whether it is appropriate for your needs.

2. Scrubbing Too Hard

You might think that scrubbing more vigorously will help you get rid of stubborn stains, but this can actually damage your floor by making scratches that make it lose its shine. Instead, use gentle pressure and let the cleaner do most of the work for you. If possible, opt for a product that doesn’t require scrubbing at all so

1. Using the Wrong Product for Concrete Stains or Stains on a Concrete Floor

It’s easy to find products that claim to remove just about any stain from concrete, but they may not be the best products to use. Many common cleaning agents can be abrasive and actually etch or burn the surface of your concrete floor, creating more problems than they solve.

If you have concrete stains or stains on your concrete floor, look for a product that is specifically formulated for those types of job! These products are safer and easier to use with better results.

2. Not Protecting Your Skin & Eyes While Cleaning Concrete Stains or Stains on a Concrete Floor

Hydrochloric (muriatic) acid is one of the most effective products you can use to clean concrete stains, but it is highly corrosive and can cause serious injuries if it splashes into your eyes or onto your skin. It is critical that you always wear eye protection when handling this acid and avoid splashing it onto yourself by wearing long sleeves and pants along with rubber gloves.

3. Using Acid Incorrectly When Cleaning Concrete Stains or Stains on a Concrete Floor

Exposing hydrochloric acid directly

3 Mistakes You Make While Cleaning Concrete Stains

Cleaning concrete stains is tough. It requires a strong product that can be applied to the surface without damaging it, and for many DIYers, that means using a harsh chemical. But even when you’re using a safe, effective product like TSP, there are still some mistakes you might be making during the cleaning process.

Mistake

The most common mistakes made when cleaning concrete stains and cement stains involve:

1. Not treating the stain with a suitable concrete cleaner or cement cleaner

2. Not letting the stain remover or other concrete cleaners dwell for sufficient time to break down the stain

3. Applying too much pressure in scrubbing or rinsing (reverses the sealer, opens pores and allows further penetration of moisture)

This is the most common mistake made by homeowners. Many of them don’t understand where to start and how to clean concrete stains. They don’t know how to clean a concrete floor properly. This is why they make a lot of mistakes in cleaning the walls and floors of their homes.

1. Failing to Test the Stained Concrete Floor

Before you add any kind of cleaning solution to a concrete floor, it’s important to test how the solution reacts with the concrete. You never want to mix two chemicals, as this can cause all kinds of problems for your floor. So, read the label and test any product before using it on a large area of your stained concrete floor.*

2. Using a High-Pressure Washer*

High-pressure washers are great for removing grime from vinyl siding and other surfaces that can withstand the force of water. However, using a high-pressure washer on concrete can cause damage to the surface. A pressure washer does not make sense because it would not only clean off the stains, but also remove the coating.*

3. Using a Steam Cleaner*

Steam cleaners are most commonly used on hardwood floors or carpets. They produce steam that lifts dirt and stains off these surfaces. However, they aren’t safe to use on stained concrete floors or other hard surfaces, such as tile or marble countertops. When you use one of these machines on concrete, it produces intense heat that can damage your cement stain and even cause cracks in your floor.*

Many people decide to give concrete staining a try because they’ve heard it’s not too difficult and the results can be quite nice. If you’re thinking about trying to acid stain your own concrete floors, here are three common mistakes you should avoid.

1) Not cleaning the concrete thoroughly enough before staining.

2) Applying the acid stain too thickly.

3) Not neutralizing the stain after rinsing it off.

Cleaning the Concrete Before Staining

The biggest mistake that DIYers make when applying an acid stain is not cleaning the concrete thoroughly enough before they apply the stain. Because concrete is a porous material, it will absorb stains quite easily, including any dust or dirt on its surface. So if you’re going to be staining your floor, make sure you clean it really well first using a commercial cleaner designed for degreasing concrete, or a solution of trisodium phosphate (TSP) or some other strong alkaline cleaner which will remove all oil and grease from the surface. Scrub the floor with a stiff-bristle brush and rinse thoroughly before proceeding with staining. Consider renting a power washer for this step as well, since this will save time and do a better job than scrubbing by

Leave a Reply