Homeowners Guide to What is Hardibacker

  • Reading time:5 mins read
  • Post comments:0 Comments

Hardibacker is a brand name of a type of cement board used in tile installation. There are many brands and types of cement-based backerboards on the market. Hardibacker is one of the better known brands and has been around since the early 1980s. It was developed by James Hardie Industries, the same company that developed fiber-cement siding.

While it is called “backerboard,” it should not be confused with gypsum-based drywall or plywood sheets. While all three products are used to make walls ready for tiling, only cement backerboards have all the properties needed to create a permanent, moisture-resistant substrate for tile.

This article explains what backerboard is, how it works and why it’s better than other products you may have heard about.

If you’re a homeowner, you’re probably all too familiar with the trials and tribulations of home remodeling projects. No matter how well you plan, it’s likely that something will go wrong. You might run out of drywall half-way through a project, or discover that your tile adhesive doesn’t work under water.

These little surprises can be costly in terms of time and money, especially when they mean that you have to stop working on a project until you can get the right materials.

There is one product that can help cut down on these unexpected setbacks: Hardibacker. It’s not the kind of product that most homeowners know about – but they should! Here are a few reasons why:

HardiBacker board is a great product for the do-it-yourselfer. It can be used for kitchen backsplashes and bathroom walls. It’s also perfect for exterior applications like countertops, tile patios and walkways. Even though it’s a strong material that is hassle free, it’s easy to work with on any project and can be easily installed over plywood, cement backer board and gypsum drywall.

What is Hardibacker?

Hardibacker is more durable than traditional cement backer boards, making it easier to install and last longer in your home. It has a smooth surface that makes it easier to install tile on floors or walls.

The strength of the Hardibacker material means you can cut it in any direction without fear of breaking or cracking the board. You can use any type of saw or blade to cut the board, making it a flexible addition to your project. The board also has a high density that allows you to use less fasteners along with fewer sheets when installing the board, saving time and money on your project!

This is a blog about a product called hardibacker. Hardibacker is used in the construction of buildings to remove moisture. It is made of cement and is waterproof.

The blog also discusses how hardibacker compares to other building materials, like drywall and lath and plaster. The company that makes hardibacker, James Hardie Building Products, says that hardibacker offers more durability than drywall and lath and plaster.

What is Hardibacker?

Hardibacker is one of the most popular cement boards used by contractors and homeowners. It’s great for tile, waterproofing and underlayment. You can use it on walls, floors, countertops and even as a backer for fireplaces.

How does Hardibacker work?

It’s made from cement mixed with ground sand and fibres. These two ingredients (cement and sand) are mixed together and then water is added to make a slurry. Once the mixture has been formed it is pressed between sheets of paper which act as a mould for the board. Once the board has set it is removed from the mould and dried at 120 degrees celsius for a period of around 10 hours. The result is a strong cement board that can be used in a variety of construction applications.

HARDIBACKER™ cement board is an excellent substrate for tile and stone in wet areas. It is made of a combination of cement, silica, ground sand and cellulose fibers. HARDIBACKER cement board is extremely durable, moisture resistant and does not rot or corrode.

HARDIBACKER features a tongue-and-groove edge for easy alignment and minimal spacing between boards, so your installation will be fast and easy. The cement board can be installed over wood or metal studs in new construction, but it’s also lightweight enough to adhere to existing walls with thinset mortar. If you’re installing over drywall, you’ll need to add furring strips first.

For the perfect tile installation every time, look no further than our HARDIBACKER tile backer board. We have a number of different sizes available so you’ll be able to find the right one for your project.

HardieBacker is a cement backerboard that is water, mold and mildew resistant. This product is perfect for kitchens, bathrooms, showers and countertops. HardieBacker is the easiest backerboard to work with and provides a smooth surface to tile over.

HardieBacker can be installed over plywood, gypsum board or concrete subfloors. If you are tiling over a plywood floor, I recommend screwing down the hardibacker with 1″ screws every 8″ around the perimeter of the board and in the center of each board. When installing on top of plywood you will need to use a modified thinset mortar like FlexBond or Laticrete 317.

If you are installing the hardibacker directly on top of your subfloor you will need to use an unmodified thinset mortar such as Mastic. You should also screw down your hardibacker with 1″ screws every 8″ around the perimeter of the board and in the center of each board.

Leave a Reply