Parging and cinderblock information

  • Reading time:5 mins read
  • Post comments:0 Comments

Parging and cinderblock repair requires a certain level of knowledge and skill. This blog will discuss different types of parging, what it is made of, and how to apply it correctly. We will also talk about different types of cinderblocks and how to repair them properly.

parging: A very thin coat of fresh cement mortar or stucco applied to the face of a concrete wall in order to obtain a smooth surface or to fill up crevices between the blocks. It is usually applied over masonry walls

Cinderblocks are also known as “concrete masonry units.” They are strong, lightweight, easy-to-use, and relatively inexpensive building components that can be used for a variety of construction projects. Most cinder block walls are made from concrete blocks that are reinforced with steel rebar and filled with concrete.

This blog is about repairing parging and cinderblock. It provides information on how to repair parging and cinderblock. We will talk about what is parging. We will discuss how to fix cinderblock and parging. Lastly we will go over the cost of repairs around parging and cinderblock.

Parging covers up cinderblock. Parging is a thin coat of cement that covers up the ugly grey cinderblock. It smoothes out the surface so it looks nicer. It also helps protect the cinderblock from the elements I would even go as far as saying it’s waterproof when done properly.

Crack in Parging

When fixing cracks in parging you have to chip out the bad part of parge and replace it with new parge mortar mix. You can use a hammer drill, jack hammer, or chisel and hammer to chip out the bad part of parge. Use a paint brush to coat the edge where you are going to apply new mortar mix with bonding compound and then spread a thin layer onto the edge where you are going to apply new mortar mix. Then use your hand or trowel to apply new mortar mix into crack making sure not to leave

“Hire a professional!” is the usual advice given regarding parging and cinderblock repair.

And why not? If you’re going to spend thousands of dollars, it makes sense to hire someone who knows what they are doing to do it for you.

But what if there were a way to save money by doing the work yourself without sacrificing quality?

There is! And this blog will guide you through the process of completing your own repairs in an easy-to-follow, step-by-step fashion.

You’ll learn how to:

• diagnose what’s wrong with your concrete or cinderblock wall so you know exactly what to do;• prepare your wall properly so you can get a good bond;• mix and apply the parge coat in such a way that you get a smooth finish;• avoid common mistakes like bubbles and cracks;• achieve an end result that looks just as good as if you had hired someone.

Repairing parging and cinder block is a worthwhile skill to learn.

Parging & Cinderblock Repair

Repairing parging and cinder block is a worthwhile skill to learn. Parging is a cement plaster coat that is applied to the outside of foundations and chimneys. Over time, it can deteriorate. Most homeowners can do parging themselves but the job requires some special tools and materials.

What You Need


-Mixing board

-Stiff bristle brush

-Mason’s hammer or scraper

-Safety glasses

-Dust mask

Parging is the application of a cement/sand mixture over a base surface (usually concrete). Parging can also be used to cover up rough or uneven stone foundations. Although parging is often applied to rough surfaces to create a smoother finish, it can also be used as an artistic technique to create a decorative finish.

If you are looking for info about cinderblock repair, this is the place for you. Need help with your cinderblock wall? Give us a call!

The process of parging involves the application of a special cement-based mortar on the cement walls of your home to improve its exterior appearance and to fill up cracks. Parging also helps protect your concrete walls from various weather conditions such as rain, sun, snow and ice. This can extend the life of your exterior walls and prevent any costly repairs in the future.

The process requires a good knowledge of the right type of mortar and its application. It is best done by an experienced contractor who has extensive experience in applying parging to different types of surfaces.

Cinderblock is one material that needs to be parged frequently as it is extremely porous and can easily absorb moisture. The first thing you need to do before starting to apply parging is to remove all the dirt and debris from the wall surface. This will help you ensure a smooth surface for even application of parging materials.

It is also important to make sure that there are no voids or cracks in the cinderblocks before you start applying parging. This can affect how well the concrete adheres to the cinderblock surface and may cause it to peel off over time. To ensure that the concrete adheres properly, you should apply a thin coat of primer

Parging is the process of applying a mixture of sand, cement, lime and water to foundations, chimneys, retaining walls and other masonry structures. Parging can improve the appearance of structures or prevent moisture from penetrating through porous masonry walls. Sometimes parging is applied to exterior walls as a decorative finish.

Parging is commonly used on poured concrete foundations that have been allowed to cure for at least seven days. Parged concrete will not bond properly if applied before the concrete cures. The chemical reaction between the cement and lime causes heat that may crack fresh concrete.

Leave a Reply