5 Tips To Make The Most Out Of Your Cement Plaster Wall

  • Reading time:6 mins read
  • Post comments:0 Comments

Cement plastering is a method of plastering that uses cement, sand and water to create an even layer over the wall. It is a very common method that’s used for both interior and exterior walls. We’ll tell you about 5 tips that will help you make the most out of your cement plaster wall!

1.Use Coarse Sand

Using coarse sand as opposed to fine sand can be beneficial. Coarse sand helps strengthen the bond between the wall and the plastering material because the larger grains adhere better to each other compared to smaller grains which are more loosely packed together. As a result, your walls will be stronger and more durable too!

2.Use Waterproof Cement

Waterproof cement is a type of special cement that contains waterproof materials like aluminium powder, calcium chloride or sodium silicate, among others. Because it can withstand moisture better than normal cement, it is a great choice for areas that are prone to dampness or water leaks, such as kitchens or bathrooms. Not only can it prevent water seepage but it also helps reduce damage caused by termites and fungi!

3.Apply A Primer Before Cement Plastering

Primers are often overlooked because they don’t seem necessary but they

Applying cement plaster to the walls is a great way to make them look new. But if you want your walls to look their best, then you need to know how to apply it right. Here are some tips on how to make the most out of your cement plaster wall.

Cement plaster is made from sand, cement and water. The mixture is mixed together and then applied by hand with a trowel or brush. It is a great way to make sure that your walls look as good as new, no matter what condition they are in when you start working on them.

Before you begin applying cement plaster, there are a couple of things that you should do first. First, you should clean the walls thoroughly so that all of the dirt and grime will be removed from them. Second, you should apply a primer coat of paint before applying any more coats of plaster.

Cement plasters are getting popular in India due to their high durability and long lasting properties. With the modern technology, cement plasters can be used for both interior and exterior walls with different textures and designs. Cement plaster is a cost effective replacement for expensive paint, polish or tiles.

Here are tips that will help you make the most out of your cement plaster wall:

1. Use a quality brand of cement plaster, like Fosroc Wallseal which is reliable and has the required strength.

2. Apply a coat of primer on the wall before applying cement plaster to ensure that it lasts longer and give better results.

3. Don’t skimp on the thickness of mortar layer for cement plastering as this is crucial to have a durable end result. A minimum thickness of 20mm should be maintained for a good finish.

4. Use water-resistant cements during rainy season so that the walls do not suffer from dampness or seepage problems later on.

5. Maintain proper curing conditions for 7 days after applying cement plaster as it is essential for its strength development

Plastering can be a DIY job, but it must be done with caution. Plastering is not just about slapping some plaster on the wall and leaving it as it is. It is an art, and you need to know what goes into making a perfect cement plaster wall. A lot of people don’t know how to do the cement plastering properly, which results in cracks and holes in the walls.

Plastering is something that can make or break your interior décor, so it needs to be done perfectly. Here are some tips that will help you get the best out of your cement plaster wall:

1. Always use clean water when mixing cement plaster

The most important thing while mixing cement plaster is using clean water. If you are using dirty water, chances are that it will compromise the quality of the plaster and cause damage later down the road.

2. Mix all ingredients properly

You need to mix all ingredients like gypsum powder and sand together with the right amount of water before applying on the wall. Not mixing them properly can cause lumps, which will give you lumpy walls and an uneven surface. Ensure that all ingredients are mixed properly before applying them on the wall.

1. Keep the cement plaster wall clean and dry – The most important thing to do for your cement plaster wall is to keep it clean and dry. This will help avoid any damage to the surface of the wall due to weather and dust accumulation.

2. Know how to deal with cracks – Cracks on your cement plaster walls are quite common, but they should not be ignored as they can cause structural damage in the long run. If you find any cracks on your wall, do not attempt to repair them yourself. Instead, hire a professional who can take care of this issue effectively and prevent future problems from happening as well.

3. Use high-quality paint – When choosing paint for your cement plaster walls, make sure that you use high-quality products which are durable and resistant to moisture. This will ensure that your walls will look great for many years to come without requiring much maintenance or upkeep on your part!

4. Do not leave water stains – Water stains on the walls of your home can make it look dirty and unkempt, so make sure that you clean them as soon as possible using a damp cloth or sponge dipped in warm soapy water followed by rinsing off with cold water before drying thoroughly (do not use hot water since this

1. Cement Plaster

The plaster is an important construction material. It is widely used in the construction of exterior and interior walls. The application of plaster can be done on concrete, brick, stone and mud masonry walls. The plaster is a mixture of binding material (cement or lime) and aggregates with sufficient water to give workability.

2. Advantages of Cement Plaster

• It provides a smooth finish to masonry surfaces

• It covers uneven surface

• It prevents absorption of moisture from atmosphere

• It prevents rainwater from entering the masonry surface

• It protects the masonry surface from weathering

• It provides an insulation to heat, cold, noise and fire to building structure

3. Preparation Before Applying Plaster

The preparation before applying plaster is as follows:

1) The surface should be clean and free from dirt, dust, grease, oil or any other foreign material. If required wash the surface with water.

2) The loose particles are removed by wire brushing or chipping hammer.

3) All projections like protruding bricks etc., are cut off by a parging iron or by

Leave a Reply