How To Clean Concrete

  • Reading time:8 mins read
  • Post comments:0 Comments

After you’ve carefully worked out what kind of surface you’re dealing with, you can get to work.

To begin, do a spot test on the most inconspicuous area of the concrete surface you’re cleaning. If it passes, you can move forward with the cleaning process. Next, check the label on your cleaner so that you’re familiar with its recommended usage and preparation instructions. Finally, consider what equipment you’ll need to clean your space, such as a pressure washer or even a broom and dustpan!

How To Clean Concrete: Remove dirt and debris

Before you clean your concrete, make sure it’s completely dry. If there’s been a recent rain or snow, wait until the surface is completely dry to start cleaning. And if you’re washing a garage floor or sidewalk, sweep up any loose debris so you don’t turn it into a muddy mess. A leaf blower also works great for removing dirt and leaves from cracks in driveways and sidewalks.

If there’s lots of stubborn dirt and mud, use a pressure washer with wide (25-degree) nozzle at 2,700 psi to blast away grime from large areas of concrete. Rent one for around $75 per day; professional models can clean about 4,000 sq. ft. per hour for about $80 per hour. Set the machine on wide spray and hold the wand about 2 feet from the concrete as you work across an area, overlapping each pass by 1 foot as you move back and forth along the path of your spray pattern. Afterward rinse off any soap residue with clean water from a garden hose before it dries on the concrete surface.

For small areas that need extra attention(like oil stains), use a steam cleaner to loosen grime without detergent chemicals that could harm nearby landscaping plants or vegetation.$

How To Clean Concrete: Scrub the surface

If the stain is on the surface of the concrete, you can usually remove it using a stiff-bristled brush and a cleaning compound such as dishwashing liquid or trisodium phosphate (TSP). For oil stains, use a degreaser to help lift oil from the surface. You can also purchase cleaners specifically formulated for oil stains. If you want to try another option, use a pressure washer or floor buffer with an abrasive pad attachment to scrub off stubborn marks.

To find out which option is best for your concrete, continue reading.

How To Clean Concrete: Rinse away your cleaning solution

The final step in the process of cleaning and sealing your concrete is to rinse the entire surface with clean water. It is very important that you do this or it may effect the results of your sealer.

It also should be noted that after you have thoroughly rinsed away any cleaning solutions, you need to remove all water from the concrete surface. If water does not evaporate from the concrete, stains will appear and can be very difficult to remove if left for a long period of time.

To thoroughly dry any standing water on your concrete, simply wipe it up with a clean cotton cloth or squeegee.

If there are any areas where your rinsing has made the surface slippery, make sure that they are dried as soon as possible to avoid injury.

How To Clean Concrete: Drying

If you used a garden hose, squeegee and dry mop to remove excess water. If you’re in a rush and want the concrete to dry faster, use a fan to speed up the process.

Pressurized cleaning like that which comes from pressure washers should be avoided when cleaning cement, as it can cause damage. Instead use a leaf blower on the wet area to get rid of left over debris after rinsing with water

Knowing how to clean concrete is part science and part art. Depending on the situation, sometimes you’ll need a professional or recommended help.

Knowing how to clean concrete is part science and part art. Depending on the situation, sometimes you’ll need a professional or recommended help.

  • If your concrete has been stained by oil, grease or fuel, you may need to get a contractor in for acid washing (although sometimes this can be done yourself).
  • If your concrete has small cracks that are chipping off, you should have these professionally filled before polishing to make it easier – and to avoid causing further damage if you do it yourself.
  • If you have large cracks that are more than 5mm wide and deep – then again these should be filled professionally before polishing; otherwise the cracks could continue to expand during the process of polishing.Welcome to How To Clean Concrete. We are a blog about concrete cleaning and how to do it.

    This is our first post.

    I’ve spent a lot of time over the years trying to figure out how to properly clean concrete. I’m a bit of a nerd that way—I like to research, read, and discover new things.

    But you know what’s even more fun than reading about cleaning concrete? Cleaning concrete! And then writing about it.

    So I thought I’d put my passion for all things concrete-cleaning into action and record how exactly I cleaned my concrete patio. Step by step.

    Hopefully this will be helpful to some of you out there (especially if you’re also passionate about cleaning stuff), and maybe we can even swap some tips! So without further ado… here’s how I do it:

    Concrete cleaning is an important part of keeping your home and workspace in tiptop shape. While there are plenty of retail products that promise to do the job for you, it’s often much more cost-effective to use items you already have around the house. Plus, a lot of concrete cleaners are made with harsh chemicals that can damage your skin and cause short-term and long-term health problems.

    To clean concrete, you’ll first want to know what kind of stain or dirt you’re dealing with. If it’s an oil-based stain, like from a car or bicycle leaking oil, then a degreaser will be your best friend. You can make your own by combining 1 tablespoon liquid dish soap with 2 cups of warm water. Mix them together until they form suds, then apply the mixture to the stain using a soft cloth. Let sit for about 10 minutes before blotting up with a new cloth and rinsing thoroughly.

    For grease stains (like from cooking oil or butter), rub baking soda into the spot until you’ve covered it completely. Then pour hot vinegar over the baking soda and watch it bubble up! It’s fun, but please be careful not to get any on yourself or your clothes—it will burn! Once

    How to clean concrete yourself

    If you’re looking for a guide on how to clean concrete, you’ve come to the right place! Concrete is a great building material, durable and versatile. Cleaning it can seem like an insurmountable task… but it’s actually not as hard as you might think. In this article, we’ll walk you through all your options for cleaning concrete, from DIY methods to professional cleaners.

    You want to clean your concrete floors and walls, but you’re not sure how. You’ve heard that using chlorine bleach or muriatic acid can damage them, and you don’t want to make a mistake that could end up costing you a fortune.

    Don’t worry—you don’t have to be an expert to clean your concrete. There are plenty of effective ways to do it without damaging the surface. It’s all about understanding the right techniques and knowing which cleaners will get the job done without causing any harm.

    In this guide, we’ll cover everything you need to know about cleaning different kinds of concrete surfaces: from removing stains on outdoor surfaces with a pressure washer, to getting rid of mold in your basement walls with bleach or an anti-fungal cleaner.

    Cleaning concrete is a simple process, but it can be quite laborious. The good news is that it’s very easy to tackle. To clean, first remove any debris with a broom or leaf blower. Then—and this is important—make sure you’re wearing gloves and goggles!

    Mix one part bleach to four parts water, and pour the solution into a spray bottle. Spray liberally over the whole area to be cleaned, and let sit for ten minutes or so. Once the bleach has set in, use another spray bottle filled with plain water to rinse the solution off of the concrete.

    Use a pressure washer on its lowest setting (or a scrub brush) to remove any remaining dirt or stains from the concrete. Repeat if necessary.

    And that’s it!

Leave a Reply