Clean it regularly

• Clean it regularly:

It’s much easier to keep a clean concrete driveway than it is to deep-clean a dirty one. To avoid having to do a heavy-duty cleaning job, sweep up dirt, leaves, and other debris on a regular basis – especially in the fall when the leaves are falling.

To remove stains from your concrete driveway, use a power washer and spray with a mild detergent or household cleaner for larger stains. Let the solution sit for about 10 minutes and then scrub with a stiff brush and rinse off with water. If you have stubborn stains such as grease or oil spots, you can use an acrylic concrete cleaner specifically designed for tough stains like these.

Coat it with a sealer

After you clean and stain your cement, be sure to coat it with a sealer. This is an important step that you don’t want to skip because it will protect your driveway from the elements, as well as from stains.

When choosing a sealer, make sure you buy one that will work for your specific needs. Weather-resistant sealers are recommended in areas where severe weather occurs often, while waterproof sealers are good for areas that receive lots of rain or snow. Salt-resistant sealers also exist if you live in an area where salt is used on the roads during winter months.

Add color

You have three options to consider when coloring your driveway. While you can complete the job yourself, if you’re not 100% familiar with cement or dyes, it’s best left to professionals. Before you make a decision, be sure to check with your Home Owner Association (HOA). Many HOAs have strict rules about colors and patterns for driveways.

If your HOA is on board, then let’s get started. Coloring can be done to both new and existing concrete driveways. If applying color on an existing surface, make sure you thoroughly inspect the driveway for cracks or holes that need repair before adding color as this will affect how long the dye will last. Additionally, finish by adding a sealer over the top of the color which helps protect it from fading and other wear and tear.

Before doing any work on your driveway, do a test patch in an inconspicuous place first to ensure you can achieve the desired results for your home. When coloring new driveways, apply color immediately after stamping since installing color too late may prevent even absorption of the dye into the concrete. For existing driveways that are being stained for an update, clean and etch them first before applying any type of dye or stain!

You can make your cement driveway look like new by doing these 3 things.

Your driveway is the first thing that people notice about your house. It’s also one of the only things that gets seen every single time you come home and leave your house.

So it makes sense to have a driveway that you’re proud of.

But what if you don’t have the kind of money to pay someone to repave your driveway? Or what if you just don’t want to get rid of all that concrete? You can still make your cement driveway look like a million bucks by following these three steps: Cleaning, sealing, and coloring.

Here are all the details on how to get started:

Cement driveways are a great way to increase your property value and transform the look of your home. Having a beautiful driveway is not only impressive, but it’s also important! Due to the climate, rocks, salt and other substances can wreak havoc on concrete and leave it looking dingy and stained. Luckily, maintaining your cement driveway isn’t as hard as you think!

Here are three simple steps to make your cement driveway look like a million bucks:

1. Seal Your Driveway

As a general rule of thumb, you should seal your driveway around every three years. This will help prevent damage caused by the elements and protect against stains left by oil or grease drippings.

2. Scrub It Regularly

You should scrub down your driveway at least once a year to get rid of any dirt or debris that has collected over time. This can be done with soap and water, or you can use a power washer for the best results.

3. Remove Any Stains ASAP

If you spill oil on your driveway or notice that there is some sort of stain, try to remove it as soon as possible! You can do this by using a degreaser to break down the oil or letting it sit overnight with dish detergent in

You’ve just bought a house, and you’re excited to get started making it your own. But first things first: the driveway. This much-neglected part of the home is actually one of the most important parts—and it’s one that you can transform without breaking the bank (or yourself!).

Here are three simple steps to help you make your cement driveway look like a million bucks:

1. Clean up your lawn

2. Repaint the porch

3. Cover up with plants

You know that cliché about a home’s driveway being the first thing people see? Well, it’s true. Maybe you don’t notice your driveway when you’re pulling in and out of your garage all the time, but your guests do. And if your home is on the market, potential buyers will see it and make snap judgements about whether it’s worth their time or money.

What does that mean for you? It means that, even if you’re not looking to sell your house any time soon, making your cement driveway look good can boost your home value. And maybe more importantly, it will give you a feeling of pride every time you pull into the garage.

So how can you do it? Here are three steps to making your cement driveway look like a million bucks:

Step 1: Make It Shine

A good way to add instant curb appeal to your home is by cleaning and resealing your driveway. A power washer will help get rid of any scruffy markings or stains, and then you can apply sealant based on what kind of finish and color you want—you have options! You can also consider adding some paint to accentuate the borders of the driveway, which is an easy way to add some personality and definition.

It’s not news to you that I love a good cement driveway with the right amount of wear and tear. So, here are some easy steps to make your cement driveway look like a million bucks:

Step 1: Get yourself a couple of old tires and some colored spray paint. (You can get these at any craft store.)

Step 2: Cut out two circles from the center of the tires so they fit over your feet. Then, spray-paint them!

Step 3: Put on your new shoes and walk all around your neighborhood. The more cracks, the better!

If your cement driveway is looking a little worse for wear, never fear—you don’t need to replace it! Instead, follow these 3 tips and bring your cement driveway back to life.

Step 1: Hire someone to knock down any plants that are growing up through the cracks.

Step 2: Rent a pressure washer and blast away any dirt or stains that might be clinging to the surface of your cement driveway.

Step 3: Grab some paint and use it to patch up any blemishes in the cement.

Nothing’s worse than a driveway that looks as if it’s seen better days. Whether you’re hoping to sell your home or just spruce up your abode, there’s no time like the present to make your concrete driveway look great. Here are three easy ways to get started:

1. Hire a pressure washer

You might be able to rent one at a local hardware store for under $100. If you’re not a confident DIY type, hire someone who is! It’ll run you about $75-$150, but it’s well worth it.

2. Seal your driveway

This step requires absolutely no power tools or expertise. All you need is good old-fashioned elbow grease and some sealant—for best results, use an acrylic-based masonry sealer rather than an asphalt-based one (asphalt sealer can soften and discolor concrete). This step will help protect against the elements and give your driveway a shiny finish that’ll make it look brand new.

3. Use stain and dye

If pressure washing isn’t enough to get the job done, consider using a commercial cleaner specifically designed for concrete driveways that also contains stain remover. If you have a colored driveway, use some concrete dye to cover stains and

There’s nothing quite like a clean and beautiful cement driveway. When it’s in good shape, it can make your whole house look better, and you won’t need to worry about that neighbor kid skateboarding on your driveway again.

But if your driveway is looking worse for wear, don’t worry—we’ve got a few easy tricks up our sleeve to get it looking like new again.

[Step 1]

First things first: do you have cracks? You’ll want to seal them with concrete sealer before you do anything else. You can use a brush or spray bottle to apply the sealer, and once it dries, your crack will be ready for the next step.

[Step 2] Once your crack is sealed and dry, take a wire brush and sweep the surface of the entire driveway. This will remove any loose particles so that you’re starting with a clean slate.

[Step 3] It’s time for paint! You should use exterior latex concrete stain to ensure that your color lasts as long as possible. Paint small sections at a time and then wait until they dry before moving on to the next section.